5 tips for installing terracotta tiles

Terracotta tiles are beautiful items that enhance a home and are coveted by many homeowners. These tiles are not only used in living rooms, dining rooms, kitchens, and bathrooms, but also on patios and driveways. However, terracotta tiles have some inherent characteristics that make them difficult to maintain. For tiles to exceed your expectations, just follow a few basic maintenance rules.

How you can increase the life of terracotta tiles

Terracotta tiles are excessively porous and this means that you can only make the tiles work better if you are able to seal the pores. All kinds of contaminants and corrosives such as dirt, water and grime can enter the pores and seepage will gnaw away at the tiles, destroying the product completely. Using effective water-based sealers once a year is the only way to protect enamel and prevent chips and enlarged pores. Sealing is a very meticulous process and requires some expertise. It is recommended that you hire a professional to do this work for you.

You must remember to buy tiles that are resistant to water, bacteria and allergens. Since these terracotta tiles will be resistant to a number of elements, you can use them anywhere from driveways to bathrooms. Therefore, they are considered one of the most versatile flooring options. Although these are not as hard as stone tiles, they are strong and durable. They are most often used in kitchens and bathrooms.

Tips for installing terracotta tiles

• The installation task should be left to professionals only if you do not have the proper experience. In short, precision tile laying and grouting is best left to experts.

• Terracotta tiles must be laid on solid, dry and clean subfloors. Make sure you have provided the tiles with these preconditions to the subfloor for best long-term performance. You can even place them on vinyl flooring.

• You should also coat the subfloor surface with a thin cementitious adhesive that will allow the tiles to sit perfectly. Select a section of the subfloor and apply glue. Then place the tiles in the section. Once you’re done laying the tiles, move on to an adjacent section of the floor.

• You should place spacers between the tiles as this will help with grouting at a later stage.

• Tiles take about 24 hours to set. Grouting is done only after the tiles have properly seated on the subfloor.

Terracotta tile cleaning techniques are simple. You need to use a mop to sweep the dirt out of the room. Instead of a mop, vacuum cleaners can also be used.

You can then use mild soaps and detergents to mop the floors. Acidic spills such as juices, etc. they must be cleaned immediately to avoid damaging the tiles; Acid solutions should not be applied to the floor to clean it. As a protection measure you should use rugs and rugs. Carpets and rugs should be very soft and light. Be careful though, hard rubber backed mats are not suitable for terracotta floors.